SELECTION TYPE OF WRAPPING SYSTEM AND OPTIMIZATION ON DIMENSIONS OF SUSPENSION TRACTION STEEL ROPES IN PASSANGER ELEVATOR

Eriel Yusran Abdikar; Muhammad Arifudin Lukmana; Mohammad Galbi Bethalembah

doi:10.54378/josme.v2i2.7605

Authors

Eriel Yusran Abdikar Universitas Pembangunan Nasional Veteran Jakarta
Muhammad Arifudin Lukmana Universitas Pembangunan Nasional Veteran Jakarta
Mohammad Galbi Bethalembah Universitas Pembangunan Nasional Veteran Jakarta

DOI:

https://doi.org/10.54378/josme.v2i2.7605

Keywords:

diameter, elevator, wrapping, traction, steel rope

Abstract

Based on the calculation results, the choice of wrapping system specifications uses a winding angle of 175 degree with Wrapping type Single Wrape Traction Machine Above with U105 degree or to guarantee a high level of security, a winding angle of 340 degree is chosen with Wrapping type Double Wrape Traction Machine Above with U round and for lifting speed The elevator according to specifications is met by the construction of steel ropes 8x19S-CGFS DUAL TENSILE 1570/1770 MPa-1620/1770 MPa, namely steel ropes with a diameter of 12 mm and 12.7 and the one that best meets the requirements is the one with a diameter of 12 mm, which is the smallest diameter.

References

ASM International (2014) ‘ASM Handbook-Vol 19: Fatigue and Fracture’, Igarss 2014, (1).

SNI 03-6573-2001 Tata Cara Perancangan Sistem Transportasi Vertikal Dalam Gedung (Lift). (n.d).

Shi, X., Pan, Y. and Ma, X. (2017) ‘Modeling and Analysis of the Rope-Sheave Interaction at Traction Interface’, Journal of Applied Mechanics, Transactions ASME, 84(3). doi: 10.1115/1.4035584.

Ma, X., Pan, Y. and Shi, X. (2018) ‘Experimental investigation of friction and slip at the traction interface of rope and sheave’, Journal of Applied Mechanics, Transactions ASME, 85(1). doi: 10.1115/1.4038328.

https://mechanicaljungle.com/what-is-wire-rope/

Permenaker No.6 Tahun 2017 Tentang Keselamatan dan Kesehatan Kerja Elevator dan Eskalator.pdf. (n.d.).

Jiangsu Safety. (n.d). Elevator Wire Ropes.

Barney, D. G. (2020) Transportation systems in buildings; CIBSE Guide D, Cibse.

Vogel, W. (2016) ‘Influences on lifetime of wire ropes in traction lifts’, in Journal of Physics: Conference Series. doi: 10.1088/1742-6596/721/1/012014.

Kropotin, P. and Marchuk, I. (2023) ‘On efficiency of load-lifting rope-traction mechanisms used in gravity energy storage systems’, Journal of Energy Storage, 58. doi: 10.1016/j.est.2022.106393.

Herrmann, D. (2020) ‘Methods for Determining the Modulus of Elasticity of Wire and Fibre Ropes’, innoTRAC Journal, 1. doi: 10.14464/innotrac.v1i0.463.

Zayadi, A. and HP, C. (2016) ‘Analisis Kekuatan Tali Baja Pada Lift Schindler Kapasitas 1600 Kg’, Jurnal Teknologi Kedirgantaraan, 5(1). doi: 10.35894/jtk.v5i1.428.

Akhmadi Amin Nur, W. J. U. (2019) ‘Analisis Kekuatan Tali Baja Mini Crane Dengan Penggerak Mesin Sepeda Motor’, Journal Mechanical Engineering, 8(1), pp. 1–23. doi: 10.30591/nozzle.v8i1.2202.

Ashbah, A., Mangalla, L. K. and Aksar, P. (2023) ‘Analisa Kekuatan Tali Baja Sling Crane Berkapasitas 40,6 Ton Di PT. Pelindo IV (Persero) Kendari’, Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin, 8(1). doi: 10.55679/enthalpy.v8i1.29826.

Khurmi, R. S. and Gupta, J. K. (2005) A Text Book Of Machine design (SI Unit), EURASIA PUBLISHING HOUSE (PVT.) LTD.

Senjaya, A. G. and Suyitno, S. (2022) ‘Simulasi Elemen Hingga untuk Tali Baja di Bawah Pengaruh Pembengkokan Paksa’, Journal of Mechanical Design and Testing, 4(1). doi: 10.22146/jmdt.61318.

N Rudenko (1996). Materials Handling Equipment- PradnyaParamitha, Jakarta.

Wiratama, J. R. and Soeharsono, G. (2017) ‘Perancangan Semi Gantry Crane Kapasitas 10 Ton Dengan Bantuan Software’, POROS, 12(1), p. 25. doi: 10.24912/poros.v12i1.680.

https://schindler.com/en/elevators/passenger/schindler-3300.html