ANALISIS KEKUATAN VELG ALUMUNIUM MODEL D30D PADA PERUSAHAAN “A”

Sumiyanto Sumiyanto, Abdunnaser Abdunnaser

Sari


Wheels are one of the main components in a vehicle. Without wheels of vehicles will not be to function. The damage that occurs in aluminium alloy wheels for the outbreak spoke mostly occur due to a force and tension that occurs exceeds the maximum allowable voltage. With these considerations it is necessary to redesign using 3D software and simulated using finite element method. After simulated, part produce with low pressure casting and machining. Sample part test with several testing as single part such as : life test, drum test, 13° impact test. After that sample part test as running test such as : curb stone evaluation and rectangle evaluation. The results of sample testing parts such as life test, the drum test, 13 ° impact test and running test in the form of curb stone rectangle evaluation and evaluation did not reveal any cracks on the sample part. Nut torque results of sample testing parts such as curb stone evaluation have smaller in 70 N.m, with allowed limit 61,6 N.m until 88 N.m. And nut torque results of sample testing parts such as rectangle evaluation have smaller in 76 N.m, with allowed limit 61,6 N.m until 88 N.m


Kata Kunci


Wheels, Finite Element Method

Teks Lengkap:

PDF

Referensi


Anggono, Wilyanto. 2011. Deciding the Optimum Spoke Number of Motor Cycle Cast Wheel. Seminar Nasional Simulasi Velg. IX (2). 1-5.

Pringgo. 2008. Arti Kode Velg. http://www.jipku.com. Diakses pada tanggal 29 April 2017

Daryanto. 2009. Reparasi Casis Mobil. Bina Adiaksara. Jakarta.

Sifat Fisik Aluminium. http://id.wikipedia.org. Diakses pada tanggal 2 July 2017.

Hatch, John E., 2010. Aluminium Properties and Physical Metallurgy. Ohio: American Society for Metals.

A.Schey, John. 2009. Proses Manufaktur. Edisi ketiga. Yogyakarta: Penerbit Andi.

Joseph, Edward Shingley, Mechanical Engineering Design. MC Graw Hill.

James W. Dally, William F. Rally, 2008. Experimental Stress Analisis, 3rd Edition.

S, Purwantini, Elly. 2012. Pemodelan Temperatur Ruang Menggunakan Regresi Non Linier Berdasarkan Hasil Estimasi FEM 3-D Linier. Journal Program Studi Teknik Elektronika, Departemen Elektro Politeknik Elektronika Negeri Surabaya Negeri Surabaya.

Harri. 2009. Desain Dan Analisis Velg Mobil Berbasis Aluminium Alloy. Skripsi Universitas Sumatera Utara

JIS Handbook. 2009. Automobiles – Part and Component. Japanese Standart Association.

Surdia, Tata, Saito, S. 2010. Pengetahuan Bahan Teknik. Edisi kesembilan. Jakarta: PT. Pradnya Paramita.


Refbacks

  • Saat ini tidak ada refbacks.


##submission.license.cc.by4.footer##

Creative Commons License


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Fakultas Teknik UPN "Veteran" Jakarta