PERANCANGAN INSTALASI TATA UDARA RUANG BERSIH AREA PENIMBANGAN PADA INDUSTRI FARMASI KELAS E

Rudi Saputra, Abdunnaser Abdunnaser

Sari


Cleanroom in the pharmaceutical industry is needed to eliminate a wide range of contamination, due to the room around the building materials, machinery equipment production, human and others generate millions of particles that can interfere with the quality of manufactured drugs. Cleanroom in the pharmaceutical industry is based on the ISO 14644-1 standard that is in a class of E (100.000), which can be interpreted very clean conditioned room to awake from particles and microbial contamination. The number of particles in the E (100.000) class at the size of 0,5 µm limited number of 3520000 particles/m3 were obtained from the results of the design of 446771,3769 particles/m3, for a particle size of 5 µm particle number 29000 particles/m3 is obtained by 47760,7813 partikel /m3. Raw material weighing room temperature in the desain room 21 ºC and 40% RH, and the outside temperature is 32,72 ºC and 72,77% RH. The results obtained design cooling load is 17329,077 Watt, with velocity distribution of air in the airway of 0,118 m/s in air requirement of 99,615 l/s, so that the requirements for class E (100.000) according to ISO 14644-1 to the mixed flow of air velocity.


Kata Kunci


Cleanroom, ISO 14644-1, particles.

Teks Lengkap:

PDF

Referensi


Priyambodo, B. Manajemen Industri Farmasi, Global Pustaka Utama : Yogyakarta, 2007.

CPOB 2012, Penerapan Pedoman Cara Pembuatan Obat yang Baik, Badan POM RI, 2012.

ISO 14644-1: 1999 (E)

W. Whyte, Cleanrooms Technology, Fundamental of Design, Testing and Operational, John Wiley & Sons Ltd, England, 2001.

ISO 14644,Cleanrooms and Associated Controlled Environments Part 1 : Classification of air cleanliness by Particle concentration, 2015.

Ken Sutherland, Filters and Filtration Handbook, Burlington, USA, Elsevier LTD, 2008.

A Basic Design Guide for Cleanroom Applications, 2012

CPOB, Petunjuk Operasional Penerapan Pedoman Cara Pembuatan Obat yang Baik 2012 jilid 1-2, Badan POM RI, 2014.

Cleanroom Design, second editions, John Wiley & Sons Ltd, England 1999

ISO 14644-4 : 2001 (EN)

Ken. Sutherland, Filter and Filtration, Elsevier Ltd, UK, 2008

ASHRAE Hand Book, 2001

Life Sciences Industry Insights, Camfil Farr, 2011.

ASHRAE Standart 62-2001

ASHRAE Chapter 16 Ventilation and Infiltration, 2009

ASHRAE Chapter 26 Cooling Load, 1981

W. Rudoy: Cooling and heating load calculation manual (GRP 158, ASHRAE, 1997)

Smacna, Figure 14-2, Duct Friction Loss Chart (Metric Units), USA, 1990

https://onoe21.wordpress.com/laporan-agroklimatologi-tentang-stasiun-klimatologi/pengukuran-suhu-tanah/

ASHRAE Chapter 29 Nonresidental Cooling and Heating Load Calculation procedures, 2001

Psychrometry One of the Fundamental Series, Trane, 2012

Buchori, Luqman. Heat Transfer, Semarang, 2004

Ahmad Azis, Perancangan Instalasi Tata Udara Cleanrooms pada Industry Farmasi kelas 100, Jakarta, 2014


Refbacks

  • Saat ini tidak ada refbacks.


##submission.license.cc.by4.footer##

Creative Commons License


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Fakultas Teknik UPN "Veteran" Jakarta