ANALISA EFEKTIVITAS ALAT PENUKAR KALOR JENIS SHELL AND TUBE HASIL PERENCANAAN MAHASISWA SKALA LABORATORIUM

Saut Siagian

Sari


Heat exchanger is a means of heat transfer from the fluid temperature is higher to a fluid other
temperature is lower, in which the heat exchanger is one tool that is often found in industries such
as thermal power plant, machinery chemical processes, equipment air conditioner, refrigerator,
radiators etc. The design of the exchanger draw string shell and tube is planned using two fluids
are cold fluid (water) in tempratur (Tco = 37 ° C) with a flow rate past the fluid (mc = 0.122 kg / s)
and the hot fluid (oil) on tempratur (Thi = 47 ° C) with a flow rate past the fluid (mh = 0.075 kg /
s) in which the operation of Heat exchanger will be operated on a thermal load constant that is
equal to 5100 watts, then in in the planning of found the number of tube of Heat exchanger was 37
pieces with effectiveness of Heat exchanger result of the design is 62%.

Kata Kunci


Heat exchanger, shell and tube, constant thermal loads

Teks Lengkap:

PDF

Referensi


Ramesh K. Sahah and Dusan P Sekulic2003.

Fundamentals of Heat Exchenger Desing. John

Wiley & Son,INC.Hoboken, New Jersey.

Ricahard. C. Byrne. 2000. Standard ofthe

Turbular Excharnger ManufacturesAssociation,

standards of the Turbular Exchanger Manufacture

Assocition,INC. New York,.

Keith Escoe, A., Mechanical Design ofProcess

Systems, vol. 2, Gulf Pub.Company, Houston

Texas, 1986.

Soekardi. C. April 2001. Prediksi karakteristik

termal sebuah penukarkalor dampak pemilihan

faktor pengotoran konstan, Poros, 4 No 2, 141-150.

Soekardi.C. April 2002. Implikasi Perancangan

Sebuah penukar kalor dengan faktor Pengotoran

dan fungsi waktu terhadap kinerjanya pada kondisi

operasi beban thermal konstan, Poros,Vol. 5. NO.

p. 129-137.

Thurmarimurungan M. 2006. Performance

Analysis of Shell and Tube Heat Exchanger

Using Miscedle System. American Journal of

Applied Sciences.

Yulianto S. 2010. Analisa Perancangan Alat

Pendingin Jenis Shell And Tube Dengan

Cleaning Interval yang Bervariasi. Tesis Program

Studi Teknik Mesin Universitas Pancasila


Article Metrics

Sari view : 52 times
PDF - 983 times

Refbacks

  • Saat ini tidak ada refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Fakultas Teknik UPN "Veteran" Jakarta