UJI PREDIKSI UMUR KEANDALAN OPERASI RADIAL BALL BEARING PADA MOTOR DIESEL SINGLE CYLINDER DENGAN PENDEKATAN AMBANG BATAS KEAUSAN

Authors

  • Mohammad Rusdy Hatuwe Program Studi Teknik Mesin, Universitas Pembangunan Nasional “Veteran” Jakarta,Indonesia
  • Yuhani Djaja Program Studi Teknik Mesin, Universitas Pembangunan Nasional “Veteran” Jakarta,Indonesia

DOI:

https://doi.org/10.54378/bt.v12i2.71

Abstract

Factually where the bearingss are not functioning properly makes the performance of the entire system will decrease or can not work properly. In this study, the wear test data that will be used is the data for the operating hours of 100 hours, 200 hours, 300 hours, 400 hours and 500 hours and the first converted into a linear function to obtain a threshold of wear of each specimen. In accordance with the objectives to be achieved in this study was to determine the relationship between the limits hours of operation and wear limit set maximum ball bearings manufacturer. The data used in this study is through the mechanism of experimental tests on Diesel engines Yanmar 15 HP, 1700 RPM using 3 specimens to be validated. Furthermore, these data will be generated from a particular distribution which will provide an overview wear limit as a function of operating hours.

References

Arismunandar. W, 1998,“Penggerak Mula Motor Bakar Torak”, Penerbit ITB;Bandung

Khovack. M, 1968,“Motor Vehicle Engines” International Edition, Mir Publishers, Moscow.

Maleev, V, L, 1945, “ Internal – Combustion Engine “, Mc Graw Hill Book, Co; New York.

Maintenance replacement and Reliability ; Theory and Applications Andrew K.S Jardine and Albert H.C Tsang . Taylor & Francis

Petrovsky. N, 1968, “Marine Internal Combustion Engines”, Interntional Edition, Mir Publishers; Moscow,

PT SKF Indonesia, 2002, “ Training Pengetahuan Bearing “, PT SKF Indonesia; Jakarta.

Shigley, Joseph, E, 1999, “ Perencanaan Teknik Mesin “, Jilid 1, Penerbit Erlangga; Jakarta.

Shigley, Joseph, E, 1999, “ Perencanaan Teknik Mesin “, Jilid 2, Penerbit Erlangga; Jakarta.

Sularso dan Suga, kyokatsu, 1983, “ Dasar – dasar Perencanaan dan Pemilihan Elemen Mesin, Pradnyaparamita; Jakarta

Reinholtz,Charles, Kinematics and Dynamics of Machinery, Prentice Hall, 1990

Holowenko, A.R, Kinematics and Dynamics of Machinery, Erlangga, 1993

Wilson, Charles, Kinematics and Dynamics oh Machinery, Harper & Row, New York, 1983

David F. Griffiths, An Introduction to Matlab, The University Dundee, Stockholm, Sweden, 2001

Mark’s Standard Handbook for Mechanical Engineer, 9th ed.

Paul K. Yin, Numerical methods on Spreadsheet for Machinnery Design Project, International journal Engineering Ed Vol. 13, No. 6, p. 412-416, Great Britania, 1997

Rajput, R.K. Thermal Engineering, Laxmi Publication (P) LTD, New Delhi, 2003 http://emissary.prenhall.com/esource

Published

2017-08-02