PREDIKSI PENGGANTIAN MINYAK PELUMAS MOTOR DIESEL GENERATOR SET BERDASARKAN LAJU PERUBAHAN VISKOSITAS DAN TOTAL BASE NUMBER DENGAN PENDEKATAN LINIERITAS

Mohammad Galbi, Ishak A

Abstract


Diesel engine as the prime mover or as an auxiliary motor is still very dominant use on the ship. Diesel engines can operate with the same four-stroke cycle gasoline engine with: intake, compression, combustion and exhaust. One advantage of the diesel engine is the fuel consumption is better than gasoline engines due to lower pumping loss and high compression ratio. Conversely, there are drawbacks, such as vibration and noise during operation and large this state will increase along with the deterioration of the quality of lubricants. To detect the
condition of lubricants can be done by measuring the viscosity and total base number (TBN) .. Nevertheless, every machine has different characteristics from each other, so as to know the condition of engine lubricant is casuistry anyway. In this case, replacement of engine lubricant boat with linearity approach is on a machine that has a high reliability aimed at determining the condition of engine lubricant according to the hours of operation.

Keywords


Diesel engines, lubricants, viscosity, TBN.

References


Bannister, Kenneth E., Lubrication For Industry, 200 Madison Avenue, New

York, 1995

Mobley, R. Keith, An Introduction To Predictive Maintenance, 2011

Schulz, Erich J., Diesel Equipment I, 2009

Majumdar, S.R., Oil Hydraulic Principles and Maintenance, Mc Graw Hill, Singapore, 2001

Preventive Maintenance Product, Preventive Maintenance Product And Services, Caterpillar

S.O.S, Fluid Analysis Laboratory Guide, Caterpillar, 2012

Oil Analyzers Inc., Oil Analysis Services, Winter St., 2001

CRC Press LCC, "Tribologi Data Hand Book", 2004

Higgins, Lindley R, Maintenance Engineering Handbook, 2007

Mobley, R Keith, Fluid Power Dynamics, Butterworth-Heinemann, 2007

Parker Hannifin Corporation, Fluid Analysis Par-Test, Hydraulic Filter Division, 2011

Minyak Pelumas dan Pengaruhnya Terhadap Mesin Anda, Trakindo, 2012

Booser, E. Richard, Ph.D, CRC Handbook of Lubrication (Theory and Practice of Tribology), Volume I Application and Maintenance, CRC Press. Inc., Florida, 2008

Kowa, Procedure Manual Edition 5, Komatsu, Japan, 2011 Scheduled Oil Diesel Sampling, Fliuds Analysis Technology Laboratorium, Cilandak-Jakarta Selatan , 2010

Engineering Mathematics, Fourth Edition JOHN BIRD, BSc(Hons) CMath,

FIMA, CEng, MIEE, FCollP, FIIE, 2003


Article Metrics

Abstract view : 285 times
PDF (Bahasa Indonesia) - 2030 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Fakultas Teknik UPN "Veteran" Jakarta