ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA MANUFAKTUR PADA PROSES PEMBUATAN SUKU CADANG MOBIL ARM VISOR SHAFT

Authors

  • Endah Asti Budianti Prodi Kesmas UPN Veteran Jakarta
  • Reda Rizal Teknik Industri Fakultas Teknik Universitas Pembangunan Nasional "Veteran" Jakarta

DOI:

https://doi.org/10.54378/bt.v11i2.101

Keywords:

semi-quantitative risk analysis, risk, safety, health

Abstract

PT. XYZ is a manufacture company of vehicle spare parts. One of the product is Arm Visor Shaft D01N. The process of making Arm Visor Shaft D01N can be exposed to be potential risk for workers. The source of potential risk is from the material, equipment, machine, environment and the other hazards. Therefore the risk management of occupational health and safety is very important to be implemented in the company. Hazard identification method using the Job Safety Analysis (JSA), while for risk analysis is undertaken by semi-quantitative method that uses risk assessment criteria (consequence, probability and exposure). Based on the research that the level of risk in the process of making Arm Visor Shaft are risk with very high level has 8, substantial level has 23, priority 2 level has 2 and acceptable level has 3.

References

Anonymous. 2004. Standards Australia/Standards New Zealand Handbook Risk Management Guideline Companion to AS/NZS 4360:2004. Sydney: Standard Australia International Ltd.

Anonymous. 1970. Undang-Undang No. 1 Tahun 1970 tentang Keselamatan Kerja

Anonymous. 1994. Peraturan Menteri Tenaga Kerja Nomor: 03/MEN/1994 tantang Penyelanggaraan Program Jaminan Sosial

Tenaga Kerja

Anonymous. 1993. Keputusan Menteri Tenaga Kerja R.I. No. Kep. 463/MEN/1993 tentang Pedoman Pemberian Penghargaan Keselamatan dan Kesehatan Kerja

Fine, William T. (1971). Mathematical Evaluation for Controlling Hazards. Naval Ordnance Laboratory White OAK : Maryland.

Ramli, S. 2010. Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management. Jakarta: Dian Rakyat.

Ramli, S. 2010. Sistem Manajemen Keselamatan & Kesehatan Kerja OHSAS 18001. Jakarta:Dian Rakyat.

Santoso, Haryo, Rani Rumita dan Hutami Nuke Ardani. 2014. Kajian Risiko Kesehatan dan Keselamatan Kerja pada Mill Boiler di Pabrik Gula Pakis Baru Jati. 1st Annual Conference in Industrial and System Engineering, diakses 22 April 2015. http://eprints.undip.ac.id/44484/1/Haryo_Santoso_PROCEEDING_ACISE_2014_F

INAL.pdf

Anonymous. 2015. Profil Perusahaan PT. XYZ,

diakses 5 Juni 2015.

http://www.tosamaabadi.com

Downloads

Published

2017-08-02

Issue

Vol. 11 No. 2 (2015): Bina Teknika

Section

Articles

License

Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge

  Creative Commons License

Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Refers to these license, all research papers agree to the following terms:

  • Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
  • Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
  • Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original