ANALISIS PEMOTONGAN PIPA PRODUKSI SUMUR MINYAK DENGAN TEKNIK HYDRAJETTING MENGGUNAKAN FLUIDA ABRASIF DAN POMPA BERTEKANAN TINGGI
DOI:
https://doi.org/10.54378/bt.v15i2.1125Kata Kunci:
Energy Conservation Theory, Hydrajetting, Abrasive FluidAbstrak
An oil production well own by Company X had its production declined due to the impact of corrosion and scaling issues which happened on the production tubing. To solve the problem, an immediate action was made to replace the production tubing through a Hydrajetting cutting process which combining the abrasive fluid and high pressure pump application.
The scope of subject were limited to process analyzing and calculation which happened during the production tubing cutting process. Analysis was done through fluid mechanic principle with the usage of the Energy Conservation Theory to get an accurate result of a successful Hydrajetting cutting process for production tubing.
Analysis method was used to calculate all the data which includes fluid velocity, pressure, energy, and all the other related factors. The result of the calculation will be compared to the Hydrajetting recommendation standard.
The result from the analysis will prove and explain a successful Hydrajetting cutting process for production tubing and provide a quality measured solution to solve the problem happened on the oil production well due to damage occurred on its production tubing.
Referensi
Sharlene Lindsay, Hydra-Jet Playbook, Halliburton, Houston, Texas 2011
Muhammad Haekal, BC-PRE-021-2014-V3 GHZL-7 2” HPCT Intervention for Work Over Well, Saudi Arabia, 2014
Barlow’s Formula for theoritical burst perssure tubing, 2016
Halliburton, CAST-M Ultrasonic Tubing Casing Evaluation, Texas 2013
Kementerian Pendidikan dan Kebudayaan Republik Indonesia, Dasar-Dasar Teknik Pengeboran, Jakarta, 2013
Halliburton, Hydra BlastTM - Hydrajetting Pro Cleaning Welbore Tubular, Texas, 2015
Robert Wade Brown, SPE001572 – Theory of Formation Cutting Using Sand Erosion Process, Dallas Texas
Halliburton, 2.88-in. OD HydraBlast ProTM Tool Assembly and Operating Instructions, United States of America, 2008
Halimatuddahliana, Jurnal Pencegahan Korosi Dan Scale Pada Proses Produksi Minyak Bumi, Universitas Sumatera Utara, 2003
Motor Handbook, National Oilwell Varco, Canada, 2007
Dr. Jim B. Surjaatmadja, Technology Bulletin, Best Practive For Proppant Jetting During Fracturing and Hydrajet Perofating and Cutting, Halliburton, Duncan OK, 2011
Rully Ade Iswadi, Jurnal Analisa Pompa Bertekanan Tinggi Untuk Proses Pemotongan Tubing, Jurusan Teknik Mesin, FTI Universitas Jayabaya, 2015
SPF-243 Stimulation Pumper Float – High Pressure Pumping System, Schlumberger, 2006
H09149 Twin Panther PT SDS, Halliburton, 2012
H00924 CAST-M / CBL / MFC, Halliburton, 2013
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
PEMBERITAHUAN HAK CIPTA
KEBIJAKAN YANG DIAJUKAN UNTUK JURNAL YANG MENAWARKAN AKSES TERBUKA
Syarat yang harus dipenuhi oleh Penulis sebagai berikut:
- Penulis menyimpan hak cipta dan memberikan jurnal hak penerbitan pertama naskah secara simultan dengan lisensi di bawah Creative Commons Attribution License yang mengizinkan orang lain untuk berbagi pekerjaan dengan sebuah pernyataan kepenulisan pekerjaan dan penerbitan awal di jurnal ini.
- Penulis bisa memasukkan ke dalam penyusunan kontraktual tambahan terpisah untuk distribusi non ekslusif versi kaya terbitan jurnal (contoh: mempostingnya ke repositori institusional atau menerbitkannya dalam sebuah buku), dengan pengakuan penerbitan awalnya di jurnal ini.
- Penulis diizinkan dan didorong untuk mem-posting karya mereka online (contoh: di repositori institusional atau di website mereka) sebelum dan selama proses penyerahan, karena dapat mengarahkan ke pertukaran produktif, seperti halnya sitiran yang lebih awal dan lebih hebat dari karya yang diterbitkan.