MODIFIKASI DESAIN CETAKAN VELG 14 INCH UNTUK SEPEDA MOTOR DENGAN BAHAN PRODUK ALUMINIUM A356
DOI:
https://doi.org/10.54378/bt.v13i2.213Keywords:
Wheel, Gravity Casting, Modification, SimulationAbstract
This studi purpose to modify the design molding of motorcycle 14 inch used for gravity casting by using CAD/CAM software. Modifications are made with a view to improving the cast product results from previous research. In previous research conducted by the authors obtained the results of wheels products that still occur defects include missrun defects and shrinkage. The scope of this study is review of problems in the previous design, the foundry system design, the modification process, and the parameter determination of the simulation process. Process simulation refers to the temperature parameter of pre-heating mold of 300 and 350 oC with liquid metal pour temperature ranges 800 and 850 oC, and Heat transfer Coefficient = 500 and 700. The parameters of aluminium materials used are aluminum type A356. Analysis of the simulation process is performed to find shrinkage porosity defects that occurred. From the simulation results, the perfect product is a product with pre-heating temperature of 350 oC, 800 oC cast temperature and HTC value = 500, with a shrinkage of porosity 3.16 %.References
Bintoro, Musiono Waluyo. 2011. Pengaruh Temperatur Cetakan, Bentuk Produk dan Inokulan Al-Ti-B pada Proses Pengecoran Sentrifugal Terhadap Sifat Fisis dan Mekanis Paduan aluminium, Tesis, Yogyakarta: Universitas Gadjah mada.
Hadiansyah, Ilham; Ramdani Ito. 2011. Rancang Bangun Model Cetakan Injeksi Plastik Menggunakan Software CATIA V5R19. Studi Kasus; Pembuatan Tempat Pensil. Tugas Akhir, Bandung: Politeknik Negeri Bandung.
Dieter G. E.1988. Mechanical Metallurgy. McGraw-Hill.
Dwi Suhernowo, Suharto. Analisis Proses Pengecoran Velg Racing Dari Bahan Paduan Aluminium Silicon Dengan Cetakan Permanen, 2002.
Guleyupoglu,S. 2011. Casting Process DESIGN Guidlines. Pennsylvania: Concurrent Technologies Corporation Johnstown.
Polmear, I. J. 1995. Light Alloys: Metallurgy of the Light Metals. Arnold.
P.Groover, Mikell. Fundamentals of Modern Manufacturing.
Surdia, Tata, dan Saito Shinroku.1985.Pengetahuan Bahan Teknik. Jakarta: PT Dainippon Gitakarya Printing.
Solechan. 2010. Studi Pembuatan Prototipe Material Piston Menggunakan Limbah Piston Bekas dan ADC 12 yang Diperkuat Dengan Insert ST60 Dan Besi Cor, Tesis, Semarang: Universitas Diponegoro Semarang.
Downloads
Published
Issue
Section
License
Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge
Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Refers to these license, all research papers agree to the following terms:
- Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
- Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
- Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original