PREDIKSI PENGGANTIAN MINYAK PELUMAS MOTOR DIESEL GENERATOR SET BERDASARKAN LAJU PERUBAHAN VISKOSITAS DAN TOTAL BASE NUMBER DENGAN PENDEKATAN LINIERITAS

Authors

  • Mohammad Galbi Program Studi Teknik Mesin, UPN “Veteran” Jakarta
  • Ishak A Program Studi Teknik Mesin, UPN “Veteran” Jakarta

DOI:

https://doi.org/10.54378/bt.v12i1.97

Keywords:

Diesel engines, lubricants, viscosity, TBN.

Abstract

Diesel engine as the prime mover or as an auxiliary motor is still very dominant use on the ship. Diesel engines can operate with the same four-stroke cycle gasoline engine with: intake, compression, combustion and exhaust. One advantage of the diesel engine is the fuel consumption is better than gasoline engines due to lower pumping loss and high compression ratio. Conversely, there are drawbacks, such as vibration and noise during operation and large this state will increase along with the deterioration of the quality of lubricants. To detect the
condition of lubricants can be done by measuring the viscosity and total base number (TBN) .. Nevertheless, every machine has different characteristics from each other, so as to know the condition of engine lubricant is casuistry anyway. In this case, replacement of engine lubricant boat with linearity approach is on a machine that has a high reliability aimed at determining the condition of engine lubricant according to the hours of operation.

References

Bannister, Kenneth E., Lubrication For Industry, 200 Madison Avenue, New

York, 1995

Mobley, R. Keith, An Introduction To Predictive Maintenance, 2011

Schulz, Erich J., Diesel Equipment I, 2009

Majumdar, S.R., Oil Hydraulic Principles and Maintenance, Mc Graw Hill, Singapore, 2001

Preventive Maintenance Product, Preventive Maintenance Product And Services, Caterpillar

S.O.S, Fluid Analysis Laboratory Guide, Caterpillar, 2012

Oil Analyzers Inc., Oil Analysis Services, Winter St., 2001

CRC Press LCC, "Tribologi Data Hand Book", 2004

Higgins, Lindley R, Maintenance Engineering Handbook, 2007

Mobley, R Keith, Fluid Power Dynamics, Butterworth-Heinemann, 2007

Parker Hannifin Corporation, Fluid Analysis Par-Test, Hydraulic Filter Division, 2011

Minyak Pelumas dan Pengaruhnya Terhadap Mesin Anda, Trakindo, 2012

Booser, E. Richard, Ph.D, CRC Handbook of Lubrication (Theory and Practice of Tribology), Volume I Application and Maintenance, CRC Press. Inc., Florida, 2008

Kowa, Procedure Manual Edition 5, Komatsu, Japan, 2011 Scheduled Oil Diesel Sampling, Fliuds Analysis Technology Laboratorium, Cilandak-Jakarta Selatan , 2010

Engineering Mathematics, Fourth Edition JOHN BIRD, BSc(Hons) CMath,

FIMA, CEng, MIEE, FCollP, FIIE, 2003

Downloads

Published

2017-08-02

Issue

Vol. 12 No. 1 (2016): Bina Teknika

Section

Articles

License

Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge

  Creative Commons License

Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Refers to these license, all research papers agree to the following terms:

  • Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
  • Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
  • Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original