ANALISA KINERJA RADIATOR MOBIL TERHADAP PERUBAHAN PEMBEBANAN AC

Authors

  • Saut Siagian Program Studi Teknik Mesin, FT UPN “ Veteran” Jakarta, Jakarta Selatan, Indonesia

DOI:

https://doi.org/10.54378/bt.v12i1.90

Keywords:

Heat exhausted rate, Engine rpm variation, Engine operation by AC loading

Abstract

Radiator is one of heat exchanger applications that has a function to remove out of heat must be able to operate properly forallowed engine temperature limit. Vehicles that operate on the street usually driving with varying rpm so that the heat produced by the combustion process is not constant and then this study analyze the performance of radiators as a function of time (transient condition). Tests is done on the condition of operating the engine with five rpm variations, each for one hour with air conditioning load and without air-conditioning load. The
data to be collected includ the inlet and outlet temperatureof radiator and radiator fluid volume flow. The results obtained is heat exhausted rate as a performance radiator is increasing as with increasing of engine rpm and at load conditions with the AC produces heat exhausted rate is greater than AC without AC load. The heat exhausted rate in an hour of machine operation still shows the system operates at a transient condition due to there still exists a numerical increase in the heat exhausted rate as a function of time.

References

Bejan, Andrian, (1993), Heat Transfer, Duke University, John Willey and Sons Inc., Second Edition.

Incropera, Frank P. And de Witt, David P. (1996), Fundamentals of Heat and Mass Transfer, John Willey and Sons, Fourth Edition.

Moran, Michael J and Saphiro, Howart. N, (1996), Fundamentals of Engineering

Thermodynamics, John Willey and Sons Inc., Fourth Edition

Downloads

Published

2017-08-02

Issue

Vol. 12 No. 1 (2016): Bina Teknika

Section

Articles

License

Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge

  Creative Commons License

Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Refers to these license, all research papers agree to the following terms:

  • Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
  • Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
  • Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original