ELIMINASI PENGARUH GAYA GONCANG TERHADAP KEAUSAN BANTALAN BOLA RADIAL

Authors

  • Mohammad Galbi Dosen Program Studi Teknik Mesin Fakultas Teknik UPN “Veteran” Jakarta
  • Ishak A Dosen Program Studi Teknik Mesin Fakultas Teknik UPN “Veteran” Jakarta

DOI:

https://doi.org/10.54378/bt.v11i2.115

Keywords:

Shaking force, ball bearings, wear and tear.

Abstract

The vibration caused by the engine rotation must be within specified limits. A mechanism that is unbalanced or unstable will lead to excessive wear on ball bearings. Unbalanced condition is one of them due to a shaking force on the crankshaft which affects the wear of ball bearings as a pedestal. The problems that have been faced is the replacement of bearings after a failure caused by excessive force due to imbalance rocking rounds to get a replacement bearings before reaching failure (unreliable). The purpose of this study was to determine reliably the age of radial ball bearings in order to maintain the performance of the motor as well as the prevention of unplanned downtime nature. Prevention "malfunction" will avoid the effects on other components of diesel engines, particularly against compression disorders. Variation of residual unbalanced force large enough to cause interference with the ball bearings to reduce Mo, the rest of the unbalanced force can be siginifkan diturnkan.

References

Arismunandar. W, 1998,“Penggerak Mula Motor Bakar Torak”, Penerbit ITB;Bandung.

Khovack. M, 1968,“Motor Vehicle Engines” International Edition, Mir Publishers, Moscow.

Maleev, V, L, 1945, “ Internal – Combustion Engine “, Mc Graw Hill Book, Co; New York.

Mainenance replacement and Reliability ; Theory and Applications Andrew K.S Jardine and Albert H.C Tsang . Taylor & Francis

Petrovsky. N, 1968, “Marine Internal Combustion Engines”, Interntional Edition, Mir Publishers; Moscow,

PT SKF Indonesia, 2002, “ Training Pengetahuan Bearing “, PT SKF Indonesia; Jakarta.

Shigley, Joseph, E, 1999, “ Perencanaan Teknik Mesin “, Jilid 1, Penerbit Erlangga; Jakarta.

Shigley, Joseph, E, 1999, “ Perencanaan Teknik Mesin “, Jilid 2, Penerbit Erlangga; Jakarta.

Sularso dan Suga, kyokatsu, 1983, “ Dasar – dasar Perencanaan dan Pemilihan Elemen Mesin, Pradnyaparamita; Jakarta

Reinholtz,Charles, Kinematics and Dynamics of Machinery, Prentice Hall, 1990

Holowenko, A.R, Kinematics and Dynamics of Machinery, Erlangga, 1993

Wilson, Charles, Kinematics and Dynamics oh Machinery, Harper & Row, New York, 1983

David F. Griffiths, An Introduction to Matlab, The University Dundee, Stockholm, Sweden, 2001

Gockenbach, Mark, A Practical Introduction to Matlab, Michigan Technology University

Mark’s Standard Handbook for Mechanical Engineer, 9th ed.

Paul K. Yin, Numerical methods on Spreadsheet for Machinnery Design Project, International journal Engineering Ed Vol. 13, No. 6, p. 412-416, Great Britania, 1997

Rajput, R.K. Thermal Engineering, Laxmi Publication (P) LTD, New Delhi, 2003

Published

2017-08-02