PERUBAHAN SIFAT MEKANIK BAJA KONSTRUKSI JIS G4051 S17C SETELAH DILAKUKAN HARDENING DAN TEMPERING

Authors

  • Media Nofri Teknik Mesin Institut Sains dan Teknologi Nasional, Jakarta

DOI:

https://doi.org/10.54378/bt.v11i2.107

Abstract

Material JIS G 4051 S 17 C including low carbon steel with alloy composition 0:15% C, 0.157% Si, 1.2% Mn, 0.01% P, of 0.02% S. Low carbon steels are widely applied for construction machinery. This study aimed to analyze the effects of the process of hardening and tempering on material hardness, impack and metallografi. Results of this research show the value of Brinell hardness will increase the hardening process with temperatures of 900 C, holding time 15 minutes and the coolant medium is water. Brinell hardness is HB 364.22, is due to the structure of ferrite and pearlite transformed to martensite. Impack results increased in the process of tempering with temperature 500 C, holding time 15 minutes are cooled with air. Impack toughness value of 0.447 Joule / mm2, is because the value of tenacity to grow up and hardness decreased in the coarse grain structure.

References

George E Dieter, “Mechanical Metallurgy”. 3th edition, McGraw Hill International Editions, 1986

Avner Sidney H, “Introduction to Physical Metallurgy”. 2nd edition, McGraw Hill International Book Company, New York, 1974.

George Krauss, “Heat treatment and Processing Principles” 3th edition, Material Park, Ohio, 1995

Smith William F, “Principles of Materials Science and Engineering”. 3th edition, McGraw Hill International Book Company, New York,

Sularso, “Dasar Perancangan dan Pemilihan Elemen Mesin”. Cetakan ke-9, Pradnya Paramita. Jakarta, 1997.

Saito Shinroku and Tata Surdia,” Pengetahuan Bahan Teknik”. Cetakan ke-5,Pradnya Paramita. Jakarta,1997.

Downloads

Published

2017-08-02

Issue

Vol. 11 No. 2 (2015): Bina Teknika

Section

Articles

License

Journal Bina Teknika grants open acces to all of its content, based on that matter makes all research papers published are freely available to public which ensures greater global excchange of knowledge

  Creative Commons License

Journal Bina Teknika is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Refers to these license, all research papers agree to the following terms:

  • Attribution - Authors holds the credit of their research works published, in order to use materials from one or more research papers published in Bina Teknika should be given appropriate credit
  • Non Commercial - All research papers published in Bina Teknika may not use for commercial purposes
  • Share Alike - Any creation made under one or more concepts from research papers published in Bina Teknika should be distribute your contributions under the same license as original